Welcome to the official website of Shandong Mingding supply Chain Management Service CO.,LTD

SM490 Steel H Beam

SM490 Steel H Beam,A wide variety of h beam steel sm490 options are available to you, You can choose from cutting, bending h beam steel sm490, as well as from q235b, ss400, and q235 h beam steel sm490, and whether h beam steel sm490 is hot rolled, or welded.

Product Category：

I-Beam

Email:

info@mingdingsteel.com

WhatsApp:

+8615553113555

Related Products

Inquire Now

SM490 Steel H Beam

Product introduction

JIS G3106 SM490YA/YB H Beam is a kind of hot rolled steel. JIS G3106 SM490YA/YB H Beams has high ability to resist bending in all directions, its carrying capacity is strong, and the construction is simple, and it can save construction cost effectively.

Product	Prime SM490 Steel H Beam
Standard	ASTM,AISI,JIS,EN,DIN,GB, EN
Thickness Tolerance	±5%
Web Thickness	5-16mm
Web Width	60-900mm
Flange Thickness	7-28mm
Flange Width	50-300mm
Length	as your requirement
MOQ	5 tons
Technique	hot rolled /welded

Structural steel H beam H type beam (IPE,UPE,HEA,HEB)
JIS G3106 SM490 YA/YB H Beam chemical composition :

Standard	Grade	Method of Deoxidization	Chemical Components%
			C≤	Si≤	Mn≤	P≤	S≤	Nb≤	V≤	Ti≤	Als≥
			C≤	Si≤	Mn≤	P≤	S≤	Nb≤	V≤	Ti≤	Als≥
(Chinese Standard)	Q235B	Z	0.2	0.35	1.4	0.045	0.045
	Q345B	Z	0.2	0.5	1.7	0.035	0.035	0.07	0.2	0.2
	Q420B	Z	0.2	0.5	1.7	0.035	0.035	0.07	0.2	0.2
	Q420C	Z	0.2	0.5	1.7	0.03	0.03	0.07	0.2	0.2	0.015
	Q460C	Z	0.2	0.6	1.8	0.03	0.03	0.11	0.2	0.2	0.015
JIS Standard	SS400	Z				0.05	0.05
JIS Standard	SS540	Z			1.6	0.04	0.04
EN Standard	S235JR	Z	0.17		1.4	0.035	0.035
	S235JO	Z	0.17		1.4	0.03	0.03
	S235J2	Z	0.17		1.4	0.025	0.025
	S275JR	Z	0.21		1.5	0.035	0.035
	S275JO	Z	0.18		1.5	0.03	0.03
	S275J2	Z	0.18		1.5	0.025	0.025
	S355JR	Z	0.24	0.55	1.6	0.035	0.035
	S355JO	Z	0.2	0.55	1.6	0.03	0.03
	S355J2	Z	0.2	0.55	1.6	0.025	0.025
(ASTM Standard)	A36	Z	0.25	0.4		0.04	0.05
	A572-50	Z	0.23	0.4	1.35	0.4	0.05	0.05	0.15	0.15
	A572-60	Z	0.26	0.4	1.3	0.04	0.05	0.05	0.15	0.15
shipbuilding	A	Z	0.21	0.5	≥2.5C	0.035	0.035
shipbuilding	B	Z	0.21	0.35	0.8~1.2	0.035	0.035

Standard	Grade	Mechanical Property
		(N/MM2) Tensile Strength	(N/MM2) Yield Strength		Percentage Elongation after Fracture	Impact Power
		(N/MM2) Tensile Strength	≤16	16~40	Percentage Elongation after Fracture	20℃	0℃	-20℃
(Chinese Standard)	Q235B	370-500	≥235	≥225	≥26	≥27
	Q345B	470-630	≥345	≥325	≥21	≥34
	Q420B	520-680	≥420	≥400	≥18	≥34
	Q420C	520-680	≥420	≥400	≥19		≥34
	Q460C	550-720	≥460	≥440	≥17		≥34
JIS Standard	SS400	400-510	≥245	≥235	≥23
JIS Standard	SS540	≥540	≥400	≥390	≥17
EN Standard	S235JR	360-510	≥235	≥225	≥26	≥27
	S235JO	360-510	≥235	≥225	≥26		≥27
	S235J2	360-510	≥235	≥225	≥24			≥27
	S275JR	410-560	≥275	≥265	≥23	≥27
	S275JO	410-560	≥275	≥265	≥23		≥27
	S275J2	410-560	≥275	≥265	≥21			≥27
	S355JR	470-630	≥355	≥345	≥22
	S355JO	470-630	≥355	≥345	≥22
	S355J2	470-630	≥355	≥345	≥22
(ASTM Standard)	A36	400-550	≥250	≥250	≥23
	A572-50	≥450	≥345	≥345	≥21
	A572-60	≥520	≥415	≥415	≥18
shipbuilding	A	400-520	≥235	≥235	≥22
shipbuilding	B	400-520	≥235	≥235	≥22		≥27

Comparison Table

Nominal Size(mm)	H×B (mm)	T1(mm)	T2(mm)	JIS Weight (kg/m)	GB Weight (kg/m)	Available Length
100×100	100×100	6	8	16.9	17.2	6-16m
120×120	125×125	6.5	9	23.6	23.8	6-16m
150×75	150×75	5	7	14	14.3	6-16m
150×100	148×100	6	9	20.7	21.4	6-16m
150×150	150×150	7	10	31.1	31.9	6-16m
175×90	175×90	5	8	18	18.2	6-16m
175×175	175×175	7.5	11	40.4	40.4	6-16m
194×150	194×150	6	9	29.9	31.2	6-16m
200×100	198×99	4.5	7	17.8	18.5	6-16m
	200×100	5.5	8	20.9	21.7	6-16m
200×200	200×200	8	12	49.9	50.5	6-16m
200×200	200×204	12	12	56.2	56.7	6-16m
250×125	248×124	5	8	25.1	25.8	6-16m
250×125	250×125	6	9	29	29.7	6-16m
250×175	244×175	7	11	43.6	44.1	6-16m
300×150	298×149	5.5	8	32	32.6	6-16m
300×150	300×150	6.5	9	36.7	37.3	6-16m
300×200	294×200	8	12	55.8	57.3	6-16m
300×200	298×201	9	14	65.4		6-16m
350×175	346×174	6	9	41.2	41.8	6-16m
350×175	350×175	7	11	49.4	50	6-16m
400×200	396×199	7	11	56.1	56.7	6-16m
400×200	400×200	8	13	65.4	66	6-16m
250×250	250×250	9	14	71.8	72.4	6-16m
250×250	250×255	14	14	81.6	82.2	6-16m
300×300	300×300	10	15	93	94.5	6-16m
	294×302	12	12	83.4	85	6-16m
	300×305	15	15	105	106	6-16m
350×350	344×348	10	16	113	115	6-16m
350×350	350×350	12	1	135	137	6-16m
400×400	388×402	15	15	140	141	6-16m
	394×398	11	18	147	147	6-16m
	400×400	13	21	172	172	6-16m
	400×408	21	21	197	197	6-16m
	414×405	18	28	232	233	6-16m
	428×407	20	35	283	284	6-16m
350×250	340×250	9	14	78.1	79.7	6-16m
400×300	390×300	10	16	105	107	6-16m
450×300	440×300	11	18	121	124	6-16m
450×200	446×199	8	12	65.1	66.7	6-16m
450×200	450×200	9	14	74.9	76.5	6-16m
500×300	482×300	11	15	111	115	6-16m
500×300	488×300	11	18	125	129	6-16m
500×200	496×199	9	14	77.9	79.5	6-16m
	500×200	10	16	88.2	89.6	6-16m
	506×201	11	19	102	103	6-16m
600×200	600×200	11	17	103.4	106	6-16m
	596×199	10	15	92.4	95.1	6-16m
	606×201	12	20	118	120	6-16m
600×300	582×300	12	17	133	137	6-16m
	588×300	12	20	147	151	6-16m
	594×302	14	23	170	175	6-16m
700×300	692×300	13	20	163	166	6-16m
700×300	700×300	13	24	182	185	6-16m
800×300	800×300	14	26	207	210	6-16m
800×300	808×302	16	30	241		6-16m
900×300	890×299	15	23	210	213	6-16m
	900×300	16	28	240	243	6-16m
	912×302	18	34	283	286	6-16m

Factory video

Shandong Mingding Supply Chain Management Service Co., Ltd. was established in 2013, focusing on the production, processing and trade of metal materials. We have a professional team to provide quality service, we sincerely welcome customers at home and abroad to visit our company for guidance and long-term cooperation.

Warehouse storage

The company has the most advanced production equipment and automatic control system, to ensure the most reliable product quality. In addition, we also have a professional international trade and logistics team. With quality products and excellent service, we have established a large number of long-term customers all over the world.

Packing and delivery

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

Production Technology

Our main products include high quality carbon steel, stainless steel products,galvanized steel products, aluminum and copper. We can also provide cutting, punching, bending, polishing, shearing, wire drawing and other related service.

Honor

Application

Our company is set production processing and trade as one. The company has the most advanced production equipment and automatic control system, to ensure reliable product quality and sufficient supply capacity. Our main products are stainless steel, silicon steel, galvanized steel, carbon steel, aluminum products and other series. Applicable to engineering, coal mining, shipping, aviation, boiler, machinery, military and other fields. We sincerely welcome customers from all over the world to visit our company to discuss long-term cooperation.

Architectural field

Automotive field

Aviation field

Chemical industry field

FAQ

How do you package the product?

The inner layer is covered with waterproof paper, packed in iron and secured by fumigated wooden brackets. It can effectively protect products from corrosion in the process of sea sample transportation.

Are the products inspected before shipment?

Of course. All our products go through strict quality tests before they are packed. Those that fail will be destroyed.

Can I visit your factory?

Of course. We welcome customers from all over the world to visit our factory.

What certifications have your products passed?

We have ISO 9001, SGS, EWC and other certifications.

Can you provide samples?

Of course, we can send samples all over the world. Our samples are free of charge, but the customer needs to bear the Courier charge

What is the loading port?

Normally, we ship from Shanghai, Tianjin, Qingdao and Ningbo ports. You can choose other ports according to your needs.

I-Beam