Welcome to the official website of Shandong Mingding supply Chain Management Service CO.,LTD
API 5CT Casing Pipe
Technique: Seamless/EW
Standard: API 5CT
Out Diameter (OD): 114.3-508mm
Product Category：
Email:
WhatsApp:
API 5CT Casing Pipe
Product introduction
Casing is large diameter pipe that is assembled and inserted into a recently drilled section of a borehole and typically
held into place with cement. And we provide various Seamless Casing from 4-1/2’’-20’’ in grade H40, J55, K55,
N80, L80, C95, P110 etc. The Casing length range is R1, R2, R3, with threads of BTC, LTC, STC. According to the strength
of steel casing can be divided into different steel grade, deep well, using different steel grade. In corrosive environment
also requires the casing itself has corrosion resistance. In the complicated geologic condition place also asked the casing
having an anti-collapse performance.
| Product Name | API Spec 5CT Casing Pipe |
| Material | H40 J55 K55 N80 M65 L80 L8013CR C90 C95 T95 P110 Q125 V150 |
| Technique | Seamless/EW |
| Standard | API 5CT |
| Out Diameter (OD) | 114.3-508mm |
| Wall Thickness (WT) | 5.21-22.22mm |
| Norminal Weight | 9.5-133.0(Ib/ft) |
| Length | R1 (5.49-6.71m), R2 (8.23-9.14m), R3 (11.58-13.72m) or as customer's requirements |
| Coupling | BTC, STC, LTC, NUE, EUE, VAM, BU or no thread |
| Usage | Oil/Gas Drilling |
| Outer Diameter | Wall Thickness | Thread | Length | ||
| in | mm | kg/m | lb/ft | ||
| 4 1/2" | 114.3 | 14.14-22.47 | 9.50-15.10 | LTC/STC/BTC | R1/R2/R3 |
| 5" | 127 | 17.11-35.86 | 11.50-24.10 | LTC/STC/BTC | R1/R2/R3 |
| 5 1/2" | 139.7 | 20.83-34.23 | 14.00-23.00 | LTC/STC/BTC | R1/R2/R3 |
| 6 5/8" | 168.28 | 29.76-35.72 | 20.00-24.00 | LTC/STC/BTC | R1/R2/R3 |
| 7" | 177.8 | 25.30-56.55 | 17.00-38.00 | LTC/STC/BTC | R1/R2/R3 |
| 7 5/8" | 193.68 | 35.72-63.69 | 24.00-42.80 | LTC/STC/BTC | R1/R2/R3 |
| 8 5/8" | 219.08 | 35.72-72.92 | 24.00-49.00 | LTC/STC/BTC | R1/R2/R3 |
| 9 5/8" | 244.48 | 48.07-86.91 | 32.30-58.40 | LTC/STC/BTC | R1/R2/R3 |
| 10 3/4" | 273.05 | 48.73-97.77 | 32.75-65.70 | LTC/STC/BTC | R1/R2/R3 |
| 11 3/4" | 298.45 | 62.50-89.29 | 42.00-60.00 | LTC/STC/BTC | R1/R2/R3 |
| 13 3/8" | 339.72 | 71.43-107.15 | 48.00-72.00 | LTC/STC/BTC | R1/R2/R3 |
| 16'' | 406.4 | 96.73-162.21 | 65.00-109.00 | LTC/STC/BTC | R1/R2/R3 |
| 18 5/8'' | 473.08 | 130.21 | 87.50 | LTC/STC/BTC | R1/R2/R3 |
| 20'' | 508 | 139.89-197.93 | 94.00-133.00 | LTC/STC/BTC | R1/R2/R3 |
Technical data
Chemical Composition
| Group | Grade | Type | C | Mn | Mo | Cr | Ni max. | Cu max. | P max. | S max. | Si max. | ||||
| min. | max. | min. | max. | min. | max. | min. | max. | ||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| 1 | H40 | - | - | - | - | - | - | - | - | - | - | - | 0.03 | 0.03 | - |
| J55 | - | - | - | - | - | - | - | - | - | - | - | 0.03 | 0.03 | - | |
| K55 | - | - | - | - | - | - | - | - | - | - | - | 0.03 | 0.03 | - | |
| N80 | 1 | - | - | - | - | - | - | - | - | - | - | 0.03 | 0.03 | - | |
| N80 | Q | - | - | - | - | - | - | - | - | - | - | 0.03 | 0.03 | - | |
| R95 | - | - | 0.45 c | - | 1.9 | - | - | - | - | - | - | 0.03 | 0.03 | 0.45 | |
| 2 | M65 | - | - | - | - | - | - | - | - | - | - | - | 0.03 | 0.03 | - |
| L80 | 1 | - | 0.43 a | - | 1.9 | - | - | - | - | 0.25 | 0.35 | 0.03 | 0.03 | 0.45 | |
| L80 | 9Cr | - | 0.15 | 0.3 | 0.6 | 0.9 | 1.1 | 8 | 10 | 0.5 | 0.25 | 0.02 | 0.01 | 1 | |
| L80 | 13Cr | 0.15 | 0.22 | 0.25 | 1 | - | - | 12 | 14 | 0.5 | 0.25 | 0.02 | 0.01 | 1 | |
| C90 | 1 | - | 0.35 | - | 1.2 | 0.25 b | 0.85 | - | 1.5 | 0.99 | - | 0.02 | 0.01 | - | |
| T95 | 1 | - | 0.35 | - | 1.2 | 0.25 d | 0.85 | 0.4 | 1.5 | 0.99 | - | 0.02 | 0.01 | - | |
| C110 | - | - | 0.35 | - | 1.2 | 0.25 | 1 | 0.4 | 1.5 | 0.99 | - | 0.02 | 0.005 | - | |
| 3 | P110 | e | - | - | - | - | - | - | - | - | - | - | 0.030 e | 0.030 e | - |
| 4 | Q125 | 1 | - | 0.35 | 1.35 | - | 0.85 | - | 1.5 | 0.99 | - | 0.02 | 0.01 | - | |
| a The carbon content for L80 may be increased up to 0.50 % maximum if the product is oil-quenched. b The molybdenum content for Grade C90 Type 1 has no minimum tolerance if the wall thickness is less than 17.78 mm. c The carbon content for R95 may be increased up to 0.55 % maximum if the product is oil-quenched. d The molybdenum content for T95 Type 1 may be decreased to 0.15 % minimum if the wall thickness is less than 17.78 mm. e For EW Grade P110, the phosphorus content shall be 0.020 % maximum and the sulfur content 0.010 % maximum. NL = no limit. Elements shown shall be reported in product analysis. |
|||||||||||||||
Mechanical Properties
| Standard | Type | Tensile Strength MPa |
Yield Strength MPa |
Hardness Max. |
| API SPEC 5CT | J55 | ≥517 | 379 ~ 552 | ---- |
| K55 | ≥517 | ≥655 | --- | |
| N80 | ≥689 | 552 ~ 758 | --- | |
| L80(13Cr) | ≥655 | 552 ~ 655 | ≤241HB | |
| P110 | ≥862 | 758 ~ 965 | ---- |
Factory video
Shandong Mingding Supply Chain Management Service Co., Ltd. was established in 2013, focusing on the production, processing and trade of metal materials. We have a professional team to provide quality service, we sincerely welcome customers at home and abroad to visit our company for guidance and long-term cooperation.
Warehouse storage
The company has the most advanced production equipment and automatic control system, to ensure the most reliable product quality. In addition, we also have a professional international trade and logistics team. With quality products and excellent service, we have established a large number of long-term customers all over the world.
Packing and delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Production Technology
Our main products include high quality carbon steel, stainless steel products,galvanized steel products, aluminum and copper. We can also provide cutting, punching, bending, polishing, shearing, wire drawing and other related service.
Honor
Application
Our company is set production processing and trade as one. The company has the most advanced production equipment and automatic control system, to ensure reliable product quality and sufficient supply capacity. Our main products are stainless steel, silicon steel, galvanized steel, carbon steel, aluminum products and other series. Applicable to engineering, coal mining, shipping, aviation, boiler, machinery, military and other fields. We sincerely welcome customers from all over the world to visit our company to discuss long-term cooperation.
Architectural field
Architectural field
Automotive field
Automotive field
Aviation field
Aviation field
Chemical industry field
Chemical industry field
FAQ
How do you package the product?
The inner layer is covered with waterproof paper, packed in iron and secured by fumigated wooden brackets. It can effectively protect products from corrosion in the process of sea sample transportation.
Are the products inspected before shipment?
Of course. All our products go through strict quality tests before they are packed. Those that fail will be destroyed.
Can I visit your factory?
Of course. We welcome customers from all over the world to visit our factory.
What certifications have your products passed?
We have ISO 9001, SGS, EWC and other certifications.
Can you provide samples?
Of course, we can send samples all over the world. Our samples are free of charge, but the customer needs to bear the Courier charge
What is the loading port?
Normally, we ship from Shanghai, Tianjin, Qingdao and Ningbo ports. You can choose other ports according to your needs.
Related Products
Message
Add：Shan Gang Building, 61-11 South Gongye Road, Jinan Area, China (Shandong) Pilot Free Trade Zone
MD Steel
Message
info@mingdingsteel.com
+8615553113555