Welcome to the official website of Shandong Mingding supply Chain Management Service CO.,LTD
42CrMo hot rolled steel bar
Product Category：
Email:
WhatsApp:
42CrMo hot rolled steel bar
Product introduction
42CrMo4 is a steel for quenching and tempering, which has a good combination of strength and toughness in the quenched and tempered condition. After the oil quenching, the steel will be through hardened up to ø60 mm bar diameter. The microstructure of larger dimensions is not fully martensite. The steel is applicable to induction hardening. The surface hardness will exceed min. 53 HRC. 42CrMo4 can be delivered M-treated in order to optimize the machinability.
Technical data
| Chemical Composition | ||||||||
| Steel Grade | C | Si | Mn | P | S | Cr | Mo | Cu |
| 35CrMo | 0.38～0.45% | 0.17～0.37% | 0.50～0.80% | ≤0.035% | ≤0.035% | 0.90～1.20% | 0.15～0.25% | ≤0.30% |
Mechanical properties
| Yield strength σs/MPa (>=) | Tensile strength σb/MPa (>=) | Elongation δ5/% (>=) |
Reduction of area ψ/% (>=) |
Impact absorbing energy Aku2/J (>=) | Hardness HBS 100/3000 max |
| ≥930(95) | ≥1080(110) | ≥12 | ≥45 | ≥78(8) | ≤217HB |
In order to increase the die life to more than 800,000 die times, the pre-hardened steel can be hardened by quenching and low temperature tempering. When quenching, preheat at 500-600℃ for 2-4 hours, and then keep it at 850-880℃ for a certain period of time (at least 2 hours), then put it in oil and cool to 50-100℃ and air cooling, the hardness can reach 50 after quenching -52HRC, in order to prevent cracking, 200℃ low temperature tempering treatment should be carried out immediately. After tempering, the hardness can be maintained above 48HRC.
42CrMo Steel Heat Treatment
Annealing
Annealing in 760±10℃, furnace cooling to 400℃ then air cooling.
Normalizing
Normalizing in 760±10℃, air cooling after out of the furnace.
Notes About Quenching and Tempering Treatment
Must pay attention to the temperature of liquid coolant. And must make sure there are no oil contamination or other impurities. Otherwise, the hardness of steel will be not enough or out of the balance.
Quenching and tempering for billet steel material without processing, then it will get non-uniform hardness. So processing of forging or grinding is necessary before the Q+T.
Factory video
Shandong Mingding Supply Chain Management Service Co., Ltd. was established in 2013, focusing on the production, processing and trade of metal materials. We have a professional team to provide quality service, we sincerely welcome customers at home and abroad to visit our company for guidance and long-term cooperation.
Warehouse storage
The company has the most advanced production equipment and automatic control system, to ensure the most reliable product quality. In addition, we also have a professional international trade and logistics team. With quality products and excellent service, we have established a large number of long-term customers all over the world.
Packing and delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Production Technology
Our main products include high quality carbon steel, stainless steel products,galvanized steel products, aluminum and copper. We can also provide cutting, punching, bending, polishing, shearing, wire drawing and other related service.
Honor
Application
Our company is set production processing and trade as one. The company has the most advanced production equipment and automatic control system, to ensure reliable product quality and sufficient supply capacity. Our main products are stainless steel, silicon steel, galvanized steel, carbon steel, aluminum products and other series. Applicable to engineering, coal mining, shipping, aviation, boiler, machinery, military and other fields. We sincerely welcome customers from all over the world to visit our company to discuss long-term cooperation.
Architectural field
Architectural field
Automotive field
Automotive field
Aviation field
Aviation field
Chemical industry field
Chemical industry field
FAQ
How do you package the product?
The inner layer is covered with waterproof paper, packed in iron and secured by fumigated wooden brackets. It can effectively protect products from corrosion in the process of sea sample transportation.
Are the products inspected before shipment?
Of course. All our products go through strict quality tests before they are packed. Those that fail will be destroyed.
Can I visit your factory?
Of course. We welcome customers from all over the world to visit our factory.
What certifications have your products passed?
We have ISO 9001, SGS, EWC and other certifications.
Can you provide samples?
Of course, we can send samples all over the world. Our samples are free of charge, but the customer needs to bear the Courier charge
What is the loading port?
Normally, we ship from Shanghai, Tianjin, Qingdao and Ningbo ports. You can choose other ports according to your needs.
Related Products
Message
Add：Shan Gang Building, 61-11 South Gongye Road, Jinan Area, China (Shandong) Pilot Free Trade Zone
MD Steel
Message
info@mingdingsteel.com
+8615553113555